HobbyKing
EH200 BRUSHLESS OUTRUNNER 4100KV
| Weight | 23g |
| Size | 23 x 35mm |
| Max current | 18A/200w |
| Current | 10V/2.8A (No load) |
| Shaft | 2.3mm |
| Shaft length | 9.5mm |
Kv:4100rpm/v,
EH200 Brushless Outrunner 4100kv5 Reviews
HobbyKing
FTL 100CC FLAT-TWIN GAS ENGINE W/ CD-IGNITION
| Displacement | 100cc |
| Net Weight | 2580g |
| Prop Speed | 1600~8800rpm |
| Max power | Over 7.8kw |
| Suggested prop | 28x8, 27x10 |
| Ignition | DC-CD (6v) |
| Bore/Stroke | 43x 35 mm |
| Size | 220mm long, 245mm wide, 275mm high (Including baffle) |
Carburettor:, Mixture: 25:1 to 40:1,
FTL 100cc Flat-Twin Gas engine w/ CD-Ignition CNC Milled crank-case. ...5 Reviews
HobbyKing
TURNIGY G32 BRUSHLESS OUTRUNNER 770KV
| RPM | 770kv |
| Max current | 42A |
| No load current | 10V/2.4A |
| Current capacity | 55A/15sec |
| Internal resistance | 0.02 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 72x42mm |
Battery:, 3~4 Cell /11.1~14.8V, Weight:, 212g (not including connectors),
Designed to be a direct swap out for your 32 ...5 Reviews
HobbyKing
TURNIGY T600 BRUSHLESS OUTRUNNER FOR 600 HELI (880KV)
| Weight | 363g |
| Voltage | 4~8S |
| Max Current | 90A |
| Diameter of shaft | 6mm |
| Length of front shaft | 21.5mm |
| ESC | 100A |
Specifications:, Dimension:, 58mm x 49mm, 78mm(with shaft), Kv:880rpm/V, Turns:8T,
Is your 600 heli ready for the next level in ...5 Reviews
HobbyKing
C2230 MICRO BRUSHLESS OUTRUNNER 1780KV (27G)
| Diameter | 22.2mm |
| Length | 32mm |
| Shaft | 5mm |
| Weight | 27g (with 10cm wire) |
| Power | 98W |
| Resistance | 642 |
| Idle Current | .7A |
| Max amp | 15A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 1780rpm/v, Turns: 15,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
TURNIGY PARK300 BRUSHLESS OUTRUNNER 1380KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 1380kv |
| No load current | 8V/0.4A |
| Current capacity | 9A/15sec |
| Internal resistance | 0.33 ohm |
| Weight | 24g (not including connectors) |
| Diameter of shaft | 3mm |
| Dimensions | 37x28mm |
Max current: 7A,
Designed to provide reliable and clean power for 3D parkflyers. ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 1400KV / 550W
| Max current | 55A |
| Max Power | 550W |
| Shaft | 4mm |
| Weight | 117g |
| ESC | 60A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 18.9mm & 25mm |
| Suggested Prop | 8x4 ~ 11x5.5 |
Specs:, Model:, NTM Prop Drive 35-36A 1400, Kv:1400rpm/v, Turns:7, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4 - 14.8v - 621W - 42A,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
TURNIGY 1220 BRUSHLESS INRUNNER MOTOR 10300KV
| Diameter of shaft | 1.48mm |
| Length of front shaft | 7mm |
| Battery | 1 Cell 1S/3.7V |
| RPM | 10300kv |
| No load current | 3.7V/0.4A |
| Current capacity | 7A/15sec |
| Internal resistance | 0.342ohm |
| Dimensions | 12x22mm |
| Thrust | 19200 |
| Max Current | 4.3A |
| Battery Type | 1S Only |
Dimension:, 22mm x 12mm, 30mm(with shaft), Weight:, 8.4g (kv10300) (not including connectors), Lamination thickness: ., Max current:6A, Prop:2, ESC:7A,
2mm Spec. Suited for Mini EDF or micro brushless cars.5 Reviews
HobbyKing
TURNIGY 500 H3126 BRUSHLESS OUTRUNNER 1300KV
| Model | 3126 |
| Cells | 2~6S |
| No load Current | 3A/10V |
| Max power | 1500W |
| Weight | 186g |
| Shaft diameter | 5mm |
| Dimensions | 37.2 x 47.5mm |
| Recomended ESC | 2~6S/70A |
Turns: 5, Kv: 1300rpm/V,
This motor is specifically designed for the 500 helicopter range ...5 Reviews
HobbyKing
TURNIGY TRUST 45A SBEC BRUSHLESS SPEED CONTROLLER
| Default factory settings | Brake |
| Battery | LiPo Auto Detect |
| Low Voltage | 3.2v (power down motor) |
| Max Motor Current | 45A |
| BEC Voltage | 5.5v |
| LiPo | 2~6S |
| NiMH | 5~12cells |
| Weight | 31grams |
Max BEC Current: 3A,
Turnigy® TRUST SBEC ESC's have a very flexible and broadly ...5 Reviews
HobbyKing
TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 2100KV
| Model | 2218 |
| Cells | 2~4S |
| No load Current | 1.9A/10V |
| Max power | 500W |
| Weight | 67g |
| Shaft diameter | 3.17mm |
| Dimensions | 27.2 x 36.5mm |
| Recomended ESC | 2~4S/50A |
Turns: 6, Kv: 2100rpm/V,
This motor is specifically designed for the 450 helicopter range ...5 Reviews
HobbyKing
HEXTRONIK DT750 BRUSHLESS OUTRUNNER 750KV
| Required Voltage | 11.1v |
| Suggested Battery Capacity | 1300mAh + |
| Suggested Prop | 11x3.8 or 11x4.7 |
| Max current draw | 18A (with 11x4.7 prop) |
| Max thrust | 1000g+ |
| No Load Current | 1.4A |
| Shaft | 4M (perfectly suited to Towerpor/GWS SF Slow Fly props) |
| Weight | 78g |
| Diameter | 41mm |
| Overall length | 77mm |
Kv: 750rpm/v,
Looks can be deceiving. This outrunner is around twice the ...5 Reviews
HobbyKing
TURNIGY 2730 BRUSHLESS MOTOR 1500KV
| Diameter of shaft | 3mm |
| Length of front shaft | 10mm |
| Magnet type | 45SH |
| Thrust | 290~410g |
| Prop | 7x3.5 or smaller |
| ESC | 10A |
| Max Current | 4.5~8A |
| Lipo Cells | 2-3S |
| Download data files | TURNIGY MOTOR DATA |
Dimension:, 32mm x 27mm, 43mm(with shaft), Weight:, 26g (kv1500) (not including connectors), Lamination thickness: .,
2mm5 Reviews
HobbyKing
C05XL MICRO BRUSHLESS OUTRUNNER 10800KV
| Weight | 6.8g |
| Size | 24 x 13.9mm |
| Max current | 4A/40W |
| Current | 4.2V/0.82A (No load) |
| Shaft | 1.5mm |
| Shaft length | 7mm |
Specification:, Kv: 10800rpm/v,
C05XL Micro Brushless outrunner 10800kv5 Reviews
HobbyKing
TURNIGY AE-45A BRUSHLESS ESC
| Output | Continuous 45A, burst 50A up to 10 seconds. |
| Input Voltage | 2-6 cells lithium battery or 5-18 cells NIMH battery. |
| BEC | Linear 3A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 60mm (L) * 26mm (W) * 11mm (H). |
| Weight | 43g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
A quality SMT produced ESC with reliable components. The Turnigy ...5 Reviews